Got a somewhat interesting (and of course annoying) case of electrical interference.I can't properly put the USB cables connecting the OrangePi (little pink box) to the printers in the cable channels on the right. Once I do the connection randomly fails, causing Klipper to abort anything it currently does.I do wonder which cable causes it, or if it's a combination of the power cable, HDMI and all the other USB being bundled so rightly. 🤔 #3DPrinting
hjembaek
I would suspect a "near" broken cable - where the inner wires might connect/disconnect from the vibrations of the printer. But I won't rule out electrical interference - but a broken cable is way more likely.
@hjembaek True, I tried a different cable alread for that reason. Same issue though - depending on where either cable was located (both fail when put in the cable channel). That's one indicator I used for the diagnosis.